D-Link DS-3550 Command Line Interface Reference Manual - page 171
163
Command Parameters
enable authen_policy
disable authen_policy
show authen_policy
create authen_login
method_list_name
config authen_login
[default | method_list_name
xtacacs | tacacs+ | server_group
delete authen_login
method_list_name
show authen_login
{default | method_list_name
create authen_enable
method_list_name
config authen_enable
[default | method_list_name
xtacacs | tacacs+ | server_group
| none}
delete authen_enable
method_list_name
show authen_enable
[default | method_list_name
config authen application
{console | telnet | http | all] [login | enable] [default |
method_list_name
show authen application
create authen server_group
config authen server_group [tacacs | xtacacs | tacacs+ |
server_host
delete authen server_group
show authen server_group
create authen server_host
65535> | key [ 255> | retransmit config authen server_host 65535> | key [ 255> | retransmit delete authen server_host show authen server_host config authen parameter response_timeout config authen parameter attempt show authen parameter enable admin config admin local_enable
Each command is listed, in detail, in the following sections.