D-Link DS-3550 Command Line Interface Reference Manual - page 49
41
DES-3550:4#create snmp host 10.48.74.100 v3 auth_priv public
Command: create snmp host 10.48.74.100 v3 auth_priv public
Success.
DES-3550:4#
delete snmp host
Purpose
Used to remove a recipient of SNMP traps generated by the switch’s
SNMP agent.
Syntax
delete snmp host
Description
The delete snmp host command deletes a recipient of SNMP traps
generated by the switch’s SNMP agent.
Parameters
− The IP address of a remote SNMP manager that will
receive SNMP traps generated by the switch’s SNMP agent.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete an SNMP host entry:
DES-3550:4#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DES-3550:4#
show snmp host
Purpose
Used to display the recipient of SNMP traps generated by the
switch’s SNMP agent.
Syntax
show snmp host {
Description
The show snmp host command is used to display the IP addresses
and configuration information of remote SNMP managers that are
designated as recipients of SNMP traps that are generated by the
switch’s SNMP agent.
Parameters
− The IP address of a remote SNMP manager that will
receive SNMP traps generated by the switch’s SNMP agent.
Restrictions None.
Example usage:
To display the currently configured SNMP hosts on the switch: