D-Link DS-3550 Command Line Interface Reference Manual - page 83
75
delete fdb
Purpose
Used to delete an entry to the switch’s forwarding database.
Syntax
delete fdb
Description
This command is used to delete a previous entry to the switch’s
MAC address forwarding database.
Parameters
− The name of the VLAN on which the MAC
address resides.
− The MAC address that will be added to the forwarding
table.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete a permanent FDB entry:
DES-3550:4#delete fdb default 00-00-00-00-01-02
Command: delete fdb default 00-00-00-00-01-02
Success.
DES-3550:4#
Example usage:
To delete a multicast fdb entry:
DES-3550:4#delete fdb default 01-00-00-00-01-02
Command: delete fdb default 01-00-00-00-01-02
Success.
DES-3550:4#
clear fdb
Purpose
Used to clear the switch’s forwarding database of all dynamically
learned MAC addresses.
Syntax
clear fdb [vlan
Description
This command is used to clear dynamically learned entries to the
switch’s forwarding database.
Parameters
− The name of the VLAN on which the MAC
address resides.
− The port number corresponding to the MAC destination
address. The switch will always forward traffic to the specified device