D-Link DS-3550 Command Line Interface Reference Manual - page 117
of
210
109
DES-3550:4#config ipif System ipaddress 10.48.74.122/8
Command: config ipif System ipaddress 10.48.74.122/8
Success.
DES-3550:4#
show ipif
Purpose
Used to display the configuration of an IP interface on the switch.
Syntax
show ipif
Description
This command will display the configuration of an IP interface on the
switch.
Parameters
− The name created for the IP interface.
Restrictions None.
Example usage:
To display IP interface settings.
DES-3550:4#show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
IP Address : 10.48.74.122 (MANUAL)
Subnet Mask : 255.0.0.0
VLAN Name : default
Admin. State : Disabled
Link Status : Link UP
Member Ports : 1-50
Total Entries : 1
DES-3550:4#