D-Link DS-3550 Command Line Interface Reference Manual - page 180
172
DES-3550:4#config authen_enable method_list_name Trinity
method tacacs xtacacs local
Command: config authen_enable method_list_name Trinity
method tacacs xtacacs local
Success.
DES-3550:4#
Example usage:
To configure the default method list with authentication methods xtacacs, tacacs+ and local, in that order:
DES-3550:4#config authen_enable default method xtacacs
tacacs+ local
Command: config authen_enable default method xtacacs
tacacs+ local
Success.
DES-3550:4#
delete authen_enable method_list_name
Purpose
Used to delete a user-defined method list of authentication methods
for promoting normal user level priveledges to Administrator level
priveledges on the switch.
Syntax
delete authen_enable method_list_name
Description
This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Adminstrator level privileges.
Parameters
define the given enable method list the user wishes to delete.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete the user-defined method list “Permit”
DES-3550:4#delete authen_enable method_list_name Permit
Command: delete authen_enable method_list_name Permit
Success.
DES-3550:4#