D-Link DS-3550 Command Line Interface Reference Manual - page 155
147
enable sntp
will override any manually configured system time settings.
Parameters None.
Restrictions
Only administrator-level users can issue this command. SNTP
settings must be configured for SNTP to function (config sntp).
Example usage:
To enable the SNTP function:
DES-3550:4#enable sntp
Command: enable sntp
Success.
DES-3550:4#
disable sntp
Purpose
Disables SNTP server support.
Syntax
disable sntp
Description
This will disable SNTP support. SNTP service must be separately
configured (see config sntp).
Parameters None.
Restrictions
Only administrator-level users can issue this command.
Example:
To stop SNTP support:
DES-3550:4#disable sntp
Command: disable sntp
Success.
DES-3550:4#
config time
Purpose
Used to manually configure system time and date settings.
Syntax
config time
Description This
will
configure the system time and date settings. These will be
overridden if SNTP is configured and enabled.
Parameters
date – Express the date using two numerical characters for the day
of the month, three alphabetical characters for the name of the