D-Link DS-3550 Command Line Interface Reference Manual - page 65
57
DES-3550:4#clear log
Command: clear log
Success.
DES-3550:4#
show log
Purpose
Used to display the switch history log.
Syntax
show log {index
Description
This command will display the contents of the switch’s history log.
Parameters
index
− This command will display the history log, beginning
at 1 and ending at the value specified by the user in the
If no parameter is specified, all history log entries will be displayed.
Restrictions None.
Example usage:
To display the switch history log:
DES-3550:4#show log index 5
Command: show log index 5
Index Time Log Text
----- ------------------- ----------------------------------------------------
5 00000 days 00:01:09 Successful login through Console (Username: Anonymous)
4 00000 days 00:00:14 System started up
3 00000 days 00:00:06 Port 1 link up, 100Mbps FULL duplex
2 00000 days 00:00:01 Spanning Tree Protocol is disabled
1 00000 days 00:06:31 Configuration saved to flash (Username: Anonymous)
DES-3550:4#
enable syslog
Purpose
Used to enable the system log to be sent to a remote host.
Syntax
enable syslog
Description
The enable syslog command enables the system log to be sent to a
remote host.
Parameters None.
Restrictions
Only administrator-level users can issue this command.