D-Link DS-3550 Command Line Interface Reference Manual - page 203
195
DES-3550:4# config sim commander group_name Trinity
Command: config sim commander group_name Trinity
Success.
DES-3550:4#
download sim_ms
Purpose
Used to download firmware or configuration file to an indicated
device.
Syntax
download sim_ms [ firmware | configuration]
Description
This command will download a firmware file or configuration file to a
specified device from a TFTP server.
Parameters
firmware – Specify this parameter if the user wishes to download
firmware to members of a SIM group.
configuration - Specify this parameter if the user wishes to download
a switch configuration to members of a SIM group.
ipaddr – Enter the IP address of the TFTP server.
path_filename – Enter the path and the filename of the firmware or
switch on the TFTP server.
members – Enter this parameter to specify the members the user
prefers to download firmware or switch configuation files to. The
user may specify a member or members by adding one of the
following:
members of the SIM group will receive the firmware or
switch configuration.
all – Add this parameter to specify all members of the SIM
group will receive the firmware or switch configuration.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To
download
firmware:
DES-3550:4# download sim_ms firmware 10.53.13.94
c:/des3550.had members all
Command: download sim_ms firmware 10.53.13.94 c:/des3550.had
members all
This device is updating firmware. Please wait...