D-Link DS-3550 Command Line Interface Reference Manual - page 51
43
show trusted_host
the switch using the create trusted_host command above.
Parameters
− The IP address of the trusted host.
Restrictions none.
Example Usage:
To display the list of trust hosts:
DES-3550:4#show trusted_host
Command: show trusted_host
Management Stations
IP Address
-----------------------
10.53.13.94
Total Entries: 1
DES-3550:4#
delete trusted_host
Purpose
Used to delete a trusted host entry made using the create
trusted_host command above.
Syntax
delete trusted _host
Description
This command is used to delete a trusted host entry made using the
create trusted_host command above.
Parameters
− The IP address of the trusted host.
Restrictions
Only administrator-level users can issue this command.
Example Usage:
To delete a trusted host with an IP address 10.48.74.121:
DES-3550:4#delete trusted_host 10.48.74.121
Command: delete trusted_host 10.48.74.121
Success.
DES-3550:4#
enable snmp traps
Purpose
Used to enable SNMP trap support.