D-Link DS-3550 Command Line Interface Reference Manual - page 18
10
4
B
ASIC
S
WITCH
C
OMMANDS
The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create account
[admin|user]
config account
show account
delete account
show session
show switch
show serial_port
config serial_port
{baud_rate [9600|19200|38400|115200]
auto_logout [never|2_minutes|5_minutes
|10_minutes|15_minutes]}
enable clipaging
disable clipaging
enable telnet
disable telnet
enable web
disable web
save
reboot
reset {[config|system]}
login
logout
Each command is listed, in detail, in the following sections.
create account
Purpose
Used to create user accounts
Syntax
create [admin | user]
Description
The create account command is used to create user accounts that
consist of a username of 1 to 15 characters and a password of 0 to 15
characters. Up to 8 user accounts can be created.
Parameters
Admin
User
Restrictions
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.