D-Link DS-3550 Command Line Interface Reference Manual - page 38
30
To create an SNMP user on the switch:
DES-3550:4#create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Command: create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Success.
DES-3550:4#
delete snmp user
Purpose
Used to remove an SNMP user from an SNMP group and also to
delete an entry from the USM User Table Settings
Syntax delete
snmp
user
Description
The delete snmp user command removes an SNMP user from its
SNMP group and then deletes the entry from the USM User Table
Settings.
Parameters
− An alphanumeric string of up to 32 characters that
identifies the SNMP user that will be deleted.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete a previously entered SNMP user on the switch:
DES-3550:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3550:4#
show snmp user
Purpose
Used to display information about each SNMP username in the
SNMP group username table.
Syntax
show snmp user
Description
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
Parameters None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To display the SNMP users currently configured on the switch: