D-Link DS-3550 Command Line Interface Reference Manual - page 64
56
To display the current cpu utilization:
DES-3550:4#show utilization cpu
Command: show utilization cpu
CPU utilization :
-------------------------------------------------------------------------------
Five seconds - 15% One minute - 25% Five minutes - 14%
DES-3550:4#
clear counters
Purpose
Used to clear the switch’s statistics counters.
Syntax
clear counters {ports
Description
This command will clear the counters used by the switch to compile
statistics.
Parameters
− specifies a port or range of ports to be displayed.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To clear the counters:
DES-3550:4#clear counters ports 2-9
Command: clear counters ports 2-9
Success.
DES-3550:4#
clear log
Purpose
Used to clear the switch’s history log.
Syntax
clear log
Description This
command will clear the switch’s history log.
Parameters None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To clear the log information: