D-Link DS-3550 Command Line Interface Reference Manual - page 190
182
delete authen server_group
Purpose
Used to delete a user-defined authentication server group.
Syntax
delete authen server_group
Description This
command
will delete an authentication server group.
Parameters
define the previously created server group the user wishes to delete.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete the server group “group_1”:
DES-3550:4#delete server_group group_1
Command: delete server_group group_1
Success.
DES-3550:4#
show authen server_group
Purpose
Used to view authentication server groups on the switch.
Syntax
show authen server_group
Description
This command will display authentication server groups currently
configured on the switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on
the switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host..
Parameters
define the previously created server group the user wishes to dview.
Restrictions None.
Example usage:
To view the authentication server groups configured on the switch.