D-Link DS-3550 Command Line Interface Reference Manual - page 129
121
Example usage:
To enable 802.1x switch wide:
DES-3550:4#enable 802.1x
Command: enable 802.1x
Success.
DES-3550:4#
disable 802.1x
Purpose
Used to disable the 802.1x server on the switch.
Syntax
disable 802.1x
Description
The disable 802.1x command is used to disable the 802.1x Port-
based Network Access control server application on the switch.
Parameters None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To disable 802.1x on the switch:
DES-3550:4#disable 802.1x
Command: disable 802.1x
Success.
DES-3550:4#
show 802.1x auth_configuration
Purpose
Used to display the current configuration of the 802.1x server on the
switch.
Syntax
show 802.1x auth_configuration {ports
Description
The show 802.1x command is used to display the current
configuration of the 802.1x Port-based Network Access Control
server application on the switch.
Parameters
ports
− Specifies a port or range of ports to view.
The following details what is displayed:
802.1x Enabled | Disabled
− Shows the current status of 802.1x
functions on the switch.
Authentication Mode – Shows the authentication mode, whether it be