D-Link DS-3550 Command Line Interface Reference Manual - page 81
73
DES-3550:4#create fdb default 00-00-00-00-01-02 port 5
Command: create fdb default 00-00-00-00-01-02 port 5
Success.
DES-3550:4#
create multicast_fdb
Purpose
Used to create a static entry to the multicast MAC address
forwarding table (database)
Syntax
create multicast_fdb
Description
This command will make an entry into the switch’s multicast MAC
address forwarding database.
Parameters
− The name of the VLAN on which the MAC
address resides.
− The MAC address that will be added to the forwarding
table.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To create multicast MAC forwarding:
DES-3550:4#create multicast_fdb default 01-00-00-00-00-01
Command: create multicast_fdb default 01-00-00-00-00-01
Success.
DES-3550:4#
config multicast_fdb
Purpose
Used to configure the switch’s multicast MAC address forwarding
database.
Syntax
config multicast_fdb
Description
This command configures the multicast MAC address forwarding
table.
Parameters
− The name of the VLAN on which the MAC
address resides.
− The MAC address that will be added to the multicast
forwarding table.
[add | delete]
− Add will add ports to the forwarding table. Delete will
remove ports from the multicast forwarding table.