D-Link DS-3550 Command Line Interface Reference Manual - page 84
76
clear fdb
through this port.
all
− Clears all dynamic entries to the switch’s forwarding database.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To clear all FDB dynamic entries:
DES-3550:4#clear fdb all
Command: clear fdb all
Success.
DES-3550:4#
Example usage:
To display multicast MAC address table:
DES-3550:4#show multicast_fdb vlan default
Command: show multicast_fdb vlan default
VLAN Name : default
MAC Address : 01-00-5E-00-00-00
Egress Ports : 1-5
Mode : Static
Total Entries : 1
DES-3550:4#
show multicast_fdb
Purpose
Used to display the contents of the switch’s multicast forwarding
database.
Syntax
show mulitcast_fdb [vlan
Description
This command is used to display the current contents of the switch’s
multicast MAC address forwarding database.
Parameters
− The name of the VLAN on which the MAC address
resides.
− The MAC address that is present in the forwarding
database table.
Restrictions None.