Eclipse V12LD User Manual - page 119
V-Series Panels| User Guide
Page 119
Figure 6-73: Diagnostic menu for desktop panels
The DIAGNOSTIC menu options are as follows:
Table 34: Diagnostic menu options
Note: To return to the top level menu, press the Reply key or Reply key talk button
(DIAGNOSTIC).
Menu option
Description / comments
SYSTEMDATA
Displays the system data menu.
TEST TONE
Selecting TEST TONE turns the LED indicator
red
and
sends a 1KHz test tone to the matrix output.
Selecting Test Tone again disables the tone, and turns off
the red LED. Exiting the DIAGNOSTIC menu also turns off
the test tone.
RESET PANL
Selecting RESET PANL resets the panel to factory defaults.
It will also delete all locally assigned keys and reset all
crosspoint levels to the factory default (0dB).
Panel brightness is reset to the brightness level configured
for that panel in ECS / EHX.
TEL RELEAS
Selecting TEL RELEAS returns the user to the Direct
Access Key (DAK) page. If a telephone key is pressed
the line is released.
Note:
The panel must also have Remote Line Release enabled
in ECS / EHX for this to take effect. This function can also
be performed using the up/down volume control buttons
or rotary control.
UPGRADE
Only displayed if an update is available from the matrix.
Selecting this option displays the UPGRADE menu.