Eclipse V12LD User Manual - 7.3.3 Level
V-Series Panels| User Guide
Page 167
7.3.3 Level
The level command enables you to change the internal level (volume)
controls.
Display 2 shows the controller name.
Display 3 shows the controller value.
Figure 7-7: level display
Five level options shown in display 2 to can be set using the up/down buttons
(lever key and pushbutton panels) or the rotary encoder and talk button
(rotary panels).
The level options are:
Level options
Description / comments
main
Main internal level (volume) controller
aux
Auxiliary internal level (volume) controller
st1
Sidetone 1 internal level (volume) controller
st2
Sidetone 2 internal level (volume) controller
po
Page override controller
Table 47: level options
7.3.4 Control
This command allows the controller of a crosspoint to be changed.
Display 2 shows the output streams.
Display 3 shows the input stream.
Display 4 shows the controller name for that crosspoint.
Figure 7-8: control display