Eclipse V12LD User Manual - 7.3.6 Filter
V-Series Panels| User Guide
Page 170
The available input streams shown in display 2 are:
Options
Description / comments
hs1
Input from headset 1 microphone
Hs2
Input from headset 2 microphone
Table 51: Input stream options (display 2)
The available limiters are shown in display 3 and the limiter parameters and
units are shown in display 4.
The limiters are described below:
Options
Description / comments
type
Select a preset limiter from the range limit1 - limit6
shown in display 4.
enable
Select yes or no in display 4 to enable/disable this
limiter
decay
Decay time in ms shown in display 4
attack
Attack time in ms shown in display 4
knee
Knee in dB shown in display 4
comp
Compression shown in display 4
gain
Markup gain of limiter in dB shown in display 4
thresh
The threshold below which the limiter has no effect
shown in display 4
Table 52: Limiters (display 3)
7.3.6 Filter
The filter command allows the current filter to be displayed and changed.
Display 2 shows the input stream of the filter being accessed.
Display 3 shows the action.
Display 4 shows the action status.
Figure 7-10: filter display