Eclipse V12LD User Manual - 6.19.5 Login Port Menu
V-Series Panels| User Guide
Page 156
6.19.5 LOGIN PORT menu
Figure 6-129: Login port menu for rack mounted panels
Figure 6-130: Login port menu for desktop panels
Use the CLEAR key to clear the current login port number, and then enter the
new login port number.
In lever key and pushbutton panels, use the up / down buttons to select the
digits. For rotary panels, press the rotary control to select the left digit and the
talk button to select the right digit.
Each time a digit is selected the cursor will advance to the next digit
automatically. Pressing the lever key down or the pushbutton or the rotary
control will step back to the previous digit.
When the login port number has been entered exit the menu using the LOGIN
PORT key or talk button.
Note: The IP port that the panel uses when logging in to a matrix must be the same
as the port set up in ECS / EHX for the matrix to listen for logins.
Note: This may not be the same port number used by the panel to communicate with
an IVC-32 card set up in ECS / EHX under Matrix Hardware.