Eclipse V12LD User Manual - page 132
V-Series Panels| User Guide
Page 132
6.13.1.2 Rotary panel IFB setup: setting the audio levels
On rotary panels, you can set the audio levels when assigning IFB sources
and destinations using the rotary controls.
To change the audio levels:
3) Select the IFB destination (see above procedure).
4) Turn the rotary control associated with the selected IFB destination
key. The display changes to show the audio level and the type of level
being adjusted. When the talk button is pressed the output level to
the IFB destination is set.
5) Select the IFB source(s) (see above procedure).
6) Turn the rotary control associated with the selected IFB source key.
The display changes to show the audio level and the type of level being
adjusted. When the talk button or rotary control is pressed the input
level to the matrix is set.
Figure 6-96: Rotary panel IFB audio level setup
Figure 6-97: Rotary panels: Setting the output level