Eclipse V12LD User Manual - page 145
V-Series Panels| User Guide
Page 145
Code
Error / status
message
Description / comments
Err 1:0
Check User ID
The name or password supplied were
invalid.
Err 4:0
Media busy
The system is busy and will try again
shortly.
Info 3:0
Connecting...
OK, connecting to the IVC.
Info 5:0
Reconnecting
OK (the call is being made again with
new codec settings).
Err 8:0
Connection lost
The IVC connection was lost.
Table 40: CONNECT menu: phase 2 status / error messages
If the IVC-32 card is reachable, but another error occurs that indicates a more
detailed networking or configuration issue, then the error code starts with 6:
Code
Error / status
message
Description / comments
Err 6:0
Local call cleared
Err 6:1
Call rejected locally
Err 6:2
Locally declined
Err 6:3
Remote cleared call
IVC-32 has cleared the call
Err 6:4
Remote refused call IVC-32 has refused to accept the call
from the panel
Err 6:5
Remote ans.
timeout
The IVC-32 has not replied to the call
within the timeout period
Err 6:6
Remote stopped
IVC-32 card has stopped responding
Err 6:7
Transport cleared
Err 6:8
Transport
connection
Err 6:9
Gatekeeper cleared
Err 6:10
Cannot find user
The user name specified by the panel is
not known to the target system
Err 6:11
Not enough
bandwidth
The network did not have enough
bandwidth available for a connection
Err 6:12
No common
capabilities
Err 6:13
Call was forwarded
Err 6:14
Bad password
The panel name or the password is
incorrect
Err 6:15
Local end busy
Network congested
Err 6:16
Local end busy
Network congested
Err 6:17
Remote end busy
Network congested or IVC-32 busy
Err 6:18
Remote end busy
Network congested or IVC-32 busy
Err 6:19
Remote party
unavailable.
Target IVC-32 could not be contacted