Eclipse V12LD User Manual - 6.19.2 Ip Gateway Menu
V-Series Panels| User Guide
Page 153
address).If there is an IP address clash, the panel may repeatedly lose the
connection with the IVC-32 card, and may also cause the IVC-32 card to crash.
Note: Clear-Com recommends that DHCP is used wherever possible to automatically
assign IP addresses rather than assigning IP addresses manually in order to
reduce the risk of an address clash. For more information, see 6.19.6 DHCP
6.19.2 IP GATEWAY menu
Figure 6-123: IP Gateway menu for rack mounted panels
Figure 6-124: IP Gateway menu for desktop panels
Use the CLEAR key to clear the current IP Gateway address for the panel, and
then enter the new IP Gateway address.
In lever key and pushbutton panels, use the up / down buttons to select the
digits. For rotary panels, press the rotary control to select the left digit and the
talk button to select the right digit.
Each time a digit is selected the cursor will advance to the next digit
automatically. Pressing the lever key down or the pushbutton or the rotary
control will step back to the previous digit.