Eclipse V12LD User Manual - page 40
V-Series Panels | User Guide (draft, not yet released)
Page 40
Figure 4-16: Example GPIO logic input wiring
In the above example, pressing the footswitch applies 5V DC from the panel
between B1 and A1. This enables the detection of a logic input.
If logic input 1 has been configured in ECS / EHX to activate the Mic On/Off
function the footswitch could be used to control the panel microphone.
4.2.14 Auxiliary audio connector
The auxiliary audio connector allows additional audio inputs and outputs to be
connected to the panel.
Figure 4-17: Auxiliary audio connector
Pin
Description
Pin
Description
1
Headset 2 MIC +ve
14
Headset 2 MIC -ve
2
Headset 2 Left Ear
15
Headset 2 Left Ear Ground
3
Headset 2 Right Ear
16
Headset 2 Right Ear Ground
4
Headset 2 PTT 1
17
Headset 2 PTT 2