Eclipse V12LD User Manual - 5.1
V-Series Panels | User Guide (draft, not yet released)
Page 58
5
Using the Front Panel Controls
This chapter describes the functionality of the V-Series front panel controls in
detail, including the small functional differences between lever key panels,
pushbutton panels and rotary control panels.
Note: For a brief description of all the V-Series panels covered by this guide,
including product numbers, see Table 1: V-Series Panels covered by this
5.1
Mic On
The Mic On/Off button turns the currently selected microphone (gooseneck
microphone or headset microphone) on or off.
When the microphone is, on the
red
LED will come on to indicate that the
microphone is active. If a panel key is used to establish a talk connection the
panel microphone is automatically enabled and the indicator light is lit.
When the connection is terminated the microphone is automatically disabled.
5.2
Shift Page
By momentarily pressing and releasing the Shift Page button, you can toggle
between the main page and the currently selected shift page.
When you press and hold the Shift Page button for more than 500ms, the
panel is placed in Shift Page mode. The Shift Page menu is shown on the
display and the
red
indicator LED is lit.
From the EHX Software, you can also enable the shift button to cycle through
consecutive shift pages.
The software now supports named shift pages. This allows the user to give any
shift page a 1 - 10 character name to better identify the use of the page. See
EHX user guide for information on the naming of shift pages.
From the EHX Software, you can select two shift page options:
Selectable Shift Page
Cyclic Shift Pages
To find these options in the EHX Software, navigate to:
Configuration > Preferences > Panel & Key Operation
The V-Series Specific Settings area is located at the bottom of the Panel & Key
Operation window.
Note: If you latch any key on a shift page, it remains latched if you select a different
shift page.
Note: Shift Page Mode: when the Shift Page Menu is open, the keys on the panel
will be color coded.
Bright green: page currently selected
Dim green: keys are configured on the page
5.2.1 Selectable Shift Pages
If this option is enabled in EHX software, the shift button behaves as follows: