Eclipse V12LD User Manual - page 71
V-Series Panels | User Guide (draft, not yet released)
Page 71
Figure 5-5: Rotary Panel latched and unlatched talk to IFB
5.17.5 Rotary panel Forced Listen
Forced listen key operation on rotary panels differs from lever key and
pushbutton panels. A forced listen key on a rotary panel will show the rotary
control lit
bright green
to indicate active listen.
Pressing the rotary control, when it is configured as a forced listen, will mute
the audio from the forced listen. Pressing the rotary encoder again restores the
forced listen audio.
5.17.6 Rotary panel Reply key GPI operation
Connecting a footswitch (or other type of switch) to GPI 3, which is pre-
assigned to the Reply key, the panel will not clear the item that is currently
being viewed on the reply stack when you release the switch.
For more details, see Opto-Isolated Inputs and your ECS / EHX documentation.
Note: For an audio block diagram for V-Series panels, see [figure cross-ref].The
diagram shows all the allowed audio routes and valid crosspoints allowed by V-
Series panels. Some of the audio paths shown by the diagram are only
available with the audio mixer function in ECS / EHX.