Eclipse V12LD User Manual - 7.3.15 Module
Manual is about: V-Series Panels Digital Matrix Intercom
of
187
V-Series Panels| User Guide
Page 177
lev 1
number 0..15
relay0
closed/open
relay1
closed/open
Table 65: Input names and permissible values
7.3.15 Module
The module command allows commands to be sent to the display modules.
Display 2 shows the command.
Display 3 shows the value.
Figure 7-19: module display
The commands and permissible values are as follows:
Input names
Values
dimled
Number 0..50. This sets the brightness level for the
LEDs.
Table 66: commands and permissible values