Eclipse V12LD User Manual - 7.3.14 Gpio
V-Series Panels| User Guide
Page 176
mtx1
Mono audio to the matrix via the analogue connection
or one channel of stereo via an AES-3 card
mtx2
Second channel of stereo to matrix via AES-3 card
ext1
External output 1 on auxiliary audio connector
ext2
External output 2 on auxiliary audio connector
hotmic
Output to hot microphone on auxiliary audio
connector
Table 64: output channels (display 2)
7.3.14 gpio
This menu shows the current setting of the discrete digital inputs in the panel
General Purpose Input (GPIO) facility.
Display 2 shows the input name.
Display 3 shows its value.
Figure 7-18: gpio display
The input names and permissible values are show in the table below:
Input names
Values
micsel
GN/HS
mic1gain
number 0..15
mic1bal
bal/unbal
mic1bias
on/off
hs2gain
number 0..15
hs2bal
bal/unbal
hs2bias
on/off
fled0
on/off. This controls the function LED 0 on the front
panel
fled1
on/off. This controls the function LED 1 on the front
panel
fled2
on/off. This controls the function LED 2 on the front
panel
fled3
on/off. This controls the function LED 3 on the front
panel
lscut
cut/uncut
xlvl
on/off
lev0
number 0..15