Eclipse V12LD User Manual - Function Key Options
V-Series Panels | User Guide (draft, not yet released)
Page 65
Default settings
F1
Scrolling assign: scroll through Sort Groups and choose
which member of the group to communicate with.
F2
Alt text: toggle between text labels and alternative text
labels. For example; toggle between English and French,
or role name (lighting) and person name (John).
F3
Message menu: access the menu that allows you to
control message function options.
F4
Reset crosspoint gain. Reset volume adjustments on all
audio sources coming into the panel to 0dB.
Table 19 VL32LD function key default options
V32LD function key options
V32LD function keys can be set in the EHX configuration software to perform
the following tasks:
Function key options
Option
Description
Function key LED
behavior
Activate all pre-
selected Talk
keys.
When this option is selected, no
configured audio routes are activated
for latched keys until the associated
function key is pressed (and held).
LED is on while
the key is pressed.
Activate all pre-
selected two-
way radio Talk
keys.
When this option is selected, no
configured audio routes to two-way
radios are activated until the
associated function key is pressed
(and held).
LED is on while
the key is pressed.
Activate
configured
action
This option allows the user to
allocate a control sequence or macro
to a function key. Use the EHX
configuration software to generate
control sequence. See the Eclipse
EHX Software User Guide.
LED is on while
the key is
activating the
control sequence.
Note: this is not
the same as
indicating when
the control is
active, if the
control is
activated via
another means
then the LED will
not be lit.