Eclipse V12LD User Manual - 6.3
V-Series Panels| User Guide
Page 77
To exit delete mode press the Menu button.
6.3
Scrolling assignment
Note: For a description of how to configure and assign sort groups from the EHX
Configuration Software, see the EHX User Guide.
You can quickly assign a key to a sort group entity using the ASSIGN key. To
do this:
1) From the EHX Configuration Software, configure one or more keys as
Sort Group keys. For more information, see the EHX Software
Configuration Guide.
2) To enter Scrolling Assignment Mode, latch the ASSIGN key. All keys
that have been configured as sort group keys will flash.
Note: By default the first member of the sort group (sorted
alphabetically) is assigned to a key.
3) To select the required sort group entity, use the up/down button or
rotary controller to scroll to the entity.
Note: After 10 seconds of inactivity, you can no longer scroll through
the entities.
4) To exit Scrolling Assignment Mode, press the ASSIGN key.
Note: While in Scrolling Assignment Mode, standard talk and listen keys on the panel
behave as normal.
6.4
Top level menu
To enter the menu system press the Menu button on the front panel. The top
level menu is displayed and the
blue
menu LED is lit.
Note: From the EHX software (Configuration > Preferences > Panel & Key
Operation), you can configure the Menu key to only open the Main menu after
holding down the key for three seconds or longer. For more information, see
the EHX Software User Guide.
Press Menu again to exit Menu mode.