Eclipse V12LD User Manual - page 138
V-Series Panels| User Guide
Page 138
Figure 6-105: Supervise error message for desktop panels
The Panel Offline error message (shown above) is displayed if the target
panel cannot be supervised because it is offline.
For other errors, such as an invalid port or panel type, the Unable to
Supervise message is displayed.
When the panel is actively supervising another panel the keys displayed on
both panels are inverted to indicate the current state (instead of light text on a
dark background the key displays will show dark text on a light background).
6.14.1.1 Supervising panels
When in Supervise mode, the V-Series panel can mimic and control other V-
Series panels in the local system. This involves remote actioning of key presses
and displaying a mimic of the target panel's display. While in Supervise mode,
all key presses are processed at the target panel.
V12LD, V24LD, V12PD and V24PD panel types can be selected as
target panels to be supervised from other lever key and pushbutton
panels. Rotary panels can only supervise other rotary panels, and
cannot be supervised by lever key or pushbutton panels.
The following target panel features can be mimicked or controlled:
Audio to the target panel.
Display text.
Display level control bars.
Key presses and releases.