Eclipse V12LD User Manual - page 66
V-Series Panels | User Guide (draft, not yet released)
Page 66
Reset panel
crosspoint gains
to OdB.
Opens the Reset Xpts (Yes/No)
dialogue box. Selecting Yes resets
the volume adjustment on all
incoming audio sources to 0dB.
LED is on while
the Reset Xpts
menu is open.
Alternate text
Enables/disables the Alt Text mode
on the panel. Pressing this key will
cause the key displays to show
alternative text. Press the key again
to return to standard text.
LED is on while
the Alt Text mode
is enabled.
Scrolling
assignment
When this option is selected,
pressing the function key will result
in all keys programmed with Sort
Groups flashing. You can then use
the up and down keys on the Keyset
controls to scroll through group
members. When a group member is
visible in the key display, Talk and
Listen to that member.
LED is on while
Scrolling
Assignment
mode is enabled.
Pressing the
function key again
will exit from
scrolling
assignment mode.
This mode has a
10 second
timeout.
Supervisor
When this option is allocated to a
function key, pressing the key will
enable the first stage of Supervisor
mode. See Supervise mode in the
Eclipse V-Series User Guide.
LED is on while
Supervise mode
is enabled. To exit
Supervise mode,
press and hold the
Menu key.
Please note that
the method of
exiting Supervise
mode is not the
same as for other
function keys.
Message menu
Access the menu that allows you to
control message function options.
LED is on while
the Message menu
is open.
Table 20 V32LDE function key options (can be set in EHX software)
5.15.3 Change function key options on a V32LD panel
Use the EHX configuration software to change function key settings on a V32LD
panel.
Open EHX and navigate to Cards and Ports.