Eclipse V12LD User Manual - 7.3.5 Limit
V-Series Panels| User Guide
Page 169
The input audio stream crosspoint options are:
Crosspoint options
Description / comments
mtx1
Input mono audio from the matrix using the analog
connection or one channel of stereo using an AES-3
card
mtx2
Input a second channel of stereo from the matrix via
the AES-3 card
ext1
Input from external input 1 on the auxiliary audio
connector
ext2
Input from external input 2 on the auxiliary audio
connector
hs1
Input from headset 1 microphone
hs2
Input from headset 2 microphone
tone
Test tone input
laplay
Listen again input
voiceplay
Message recording input
Table 49: Crosspoint options in display 3 (input)
The crosspoint controller options are:
Crosspoint options
Description / comments
main
Main internal level (volume) controller assigned
aux
Auxiliary internal level (volume) controller assigned
none
No controller assigned
Table 50: Crosspoint controller options (display 4)
7.3.5 Limit
The limit command allows various operating parameters of the digital limiters
to be viewed and adjusted.
Display 2 shows the input stream of the limiter being accessed.
Display 3 shows the parameter for the limiter.
Display 4 shows its current value.
Figure 7-9: limit display