Eclipse V12LD User Manual - 7.3.1 Version
V-Series Panels| User Guide
Page 165
7.3.1 Version
The version command shows the versions of various components of the
system.
Display 2 shows the component and may be adjusted. Display 3 shows the
version of that component.
Note: The versions are not adjustable.
Figure 7-5: version display
To scroll through the panel software components, press the up/down keys
(lever key and pushbutton panels) or use the rotary control and talk button
(rotary panels) under the app display.
The components shown in display 2 are as follows:
Component
Description / comments
app
The panel application version
kernel
The linux kernel version
rootfs(v)
The version (v) of the kernel root file system
rootfs(d)
The date (d) of the kernel root file system
modules
The version of the module firmware and bootloader
sound
The version of the sound drivers
Table 44: version components in display 2
7.3.2 xpoint
The xpoint command enables you to adjust the values of the crosspoints in
the panel’s audio mixer.
Display 2 displays the output audio stream.
Display 3 shows the input audio stream.
Display 4 shows the value of the crosspoint in dB. A value of -80 signifies no
audio, and a value of 0 signifies all on.