Eclipse V12LD User Manual - page 127
V-Series Panels| User Guide
Page 127
If the initial number dial is unsuccessful, select the RELEASE key to release
the telephone line.
Select REDIAL to dial the number saved on the lower line of the display. If
you exit DIAL mode, the redial number is cleared.
The RELEASE and REDIAL keys perform the same function on 2RU panels
whether the keypad or panel keys are used to dial the number.
Note: To return to the main menu, press the Reply key or Reply key talk button
(DIAL).
6.10.1.1 Using the DIAL menu with dial pads
Using the dial pad on 2RU rack mount panels and desktop panels to access the
DIAL menu by pressing 1 will enter a different dial menu. The labels operate as
normal, and dialing out is achieved using the dial pad.
Figure 6-88: Dial menu (from dial pad shortcut) for rack mounted panels
Figure 6-89: Dial menu (from dial pad shortcut) for desktop panels
When you dial out through a TEL-14 interface module, using the DIAL
menu, no outgoing audio is transmitted until you exit the DIAL menu.
Incoming audio from the TEL-14 interface module can be heard,
however.