Eclipse V12LD User Manual - page 23
V-Series Panels | User Guide (draft, not yet released)
Page 23
Figure 3-19: Rotary key display window controls
3.4.3 Navigating the Reply key display window
By default, the Reply key is placed in the lower left corner of the panel. You
can move this to any other position from panel programming in the EHX
software.
Note: From the EHX Software, you can enable dual Reply keys. The second Reply key
appears by default directly to the right of the first Reply key. If this position is
already in use, you can either overwrite it or select another position on the
panel. For more information, see the EHX Software User Guide.
Note: You can only reply to the last two calls. Calls are not stacked.
The following points apply to dual Reply keys:
If neither Reply key has incoming calls, the first Reply key is always
populated first.
If both Reply keys have incoming calls, another incoming call replaces
the older of the two original incoming calls.
If a Reply is latched, it will not be replaced by another incoming call.
If both Reply keys are latched, further incoming calls will be heard but
will not appear on the Reply keys.
Only available on V-Series panels.
Figure 3-20: Navigating the Reply key display window