EDAN iM80 User Manual - page 133
Patient Monitor User Manual Recording
- 122 -
22.3 Recording Type
The monitor provides several types of stripe recording:
Continuous real-time recording
Time recording
Alarm recording
Trend graph, trend table recording
Arrhythmia review recording
Drug calculation titration recording
NIBP review recording
Alarm review recording
Hemodynamic Calculation result recording
12-lead analysis recording
22.4 Starting and Stopping Recording
You can start and stop the recording in the following ways:
Continuous real-time recording
Press the Record button on the front panel to start the
recording, and repress it to stop the recording.
Auto recording
Record three waveforms selected in Recorder Setup menu
according to the setup time interval in Recorder Setup
menu. It will automatically stop in 8 seconds.
Trend graph recording
Enter the Menu > Review > Trend Graph menu, and press
the Record button to start recording.
Trend table recording
Enter the Menu > Review > Trend Table menu, and press
the Record button to start recording.
NIBP review recording
Enter the Menu > Review > NIBP Review menu, then
press the Record button to start recording.
12-lead diagnosis recording
Select Record on the diagnosis review interface to start the
recording. To stop the recording, press the Record button
on the front panel.
The recorder will stop recording in the following situations:
The recording task is finished.
No paper in the recorder.
Malfunction stops the recorder from running properly.