EDAN iM80 User Manual - page 155
Patient Monitor User Manual Product Specification
- 144 -
Altitude
Working
860hPa ~ 1060hPa
Transport and Storage
700hPa ~ 1060hPa
Power Supply
100V-240V~,
50Hz/60Hz
Current=1.0A-0.5A(iM50), Pmax=1.4A-0.7A(iM80)
FUSE T 1.6AL, 250V
A.4 Display
Product
Display
Messages
iM50
Display screen: 8.4 inch colour TFT
Resolution: 800×600
A maximum of 11 waveforms
One power LED
Two alarm LED
One charge LED
iM80
Display screen: 15 inch color TFT
Resolution: 1024 × 768
A maximum of 13 waveforms
One power LED
Two alarm LED
One charge LED
A.5 Battery Specification
iM50
2.1Ah
Operating Time
180 min (At 25
°C, continuous SpO
2
measuring and
NIBP automatic measuring mode at interval of 15
minutes, recording at interval of 10 minutes)
Charge Time
200 min (Monitor is on or in standby mode.)
4.2Ah
Operating Time
420 min (At 25
°C, continuous SpO
2
measuring and
NIBP automatic measuring mode at interval of 15
minutes, recording at interval of 10 minutes)
Charge Time
380 min (Monitor is on or in standby mode.)
iM80
one
battery
(4.2Ah)
Operating Time
120 min (At 25
°C, continuous SpO
2
measuring and
NIBP automatic measuring mode at interval of 15
minutes, recording at interval of 10 minutes)
Charge Time
320 min (Monitor is on or in standby mode)
Two
batteries
(2*4.2Ah)
Operating Time
240 min (At 25
°C, continuous SpO
2
measuring and
NIBP automatic measuring mode at interval of 15
minutes, recording at interval of 10 minutes)
Charge Time
560 min (Monitor is on or in standby mode)