EDAN iM80 User Manual - page 61
Patient Monitor User Manual User Interface
- 50 -
7.7 Viewing Large Font Screen
To open the large font screen, please refer to the following steps:
1. Select the Large Font key on the screen directly or.
2. Select Menu > Display Setting > View Selection > Large Font to open this interface.
To view the large font interface of specific parameter, please select the parameter pull-down
dialog on the interface (the red circle shown in the following figure).
7.8 Changing Parameter and Waveform Colors
The user can set the display colors of parameter and waveform as desire. To change the display
color, please select Menu > Maintenance > User Maintain, enter the required password ABC.
Then select Color Select to make color changes on parameter and color.
NOTE:
To make the color changes effective, please restart the monitor after changing the colors.
7.9 Transferring a Configuration
When installing several monitors with identical user configuration, it is not necessary to set each
device separately. An USB drive may be used to transfer the configuration from monitor to
monitor.