Jeep Cherokee 2000 Service Manual - page 1182
(31) Remove overdrive support snap ring with
Snap Ring Plier Tool 7540 (Fig. 112).
(32) Remove overdrive support bolts (Fig. 113).
(33) Remove overdrive support (Fig. 114) with
bridge–type Puller 7536.
(34) Remove race from hub of overdrive support
(Fig. 115).
(35) Remove second coast brake piston snap ring
with Snap Ring Plier Tool 7540. Then remove piston
cover and piston assembly.
(36) Disassemble second coast brake piston (Fig.
116), if necessary.
(37) Remove direct and forward clutch assembly
(Fig. 117).
Fig. 112 Overdrive Support Snap Ring Removal/
Installation
1 – SNAP RING PLIERS
2 – SUPPORT SNAP RING
Fig. 113 Overdrive Support Bolt Removal
1 – SUPPORT BOLTS
Fig. 114 Removing Overdrive Support
1 – BRIDGE-TYPE PULLER TOOL
2 – OVERDRIVE SUPPORT
Fig. 115 Remove Overdrive Support Race
1 – RACE
2 – OVERDRIVE SUPPORT
21 - 274
AW–4 AUTOMATIC TRANSMISSION
XJ
DISASSEMBLY AND ASSEMBLY (Continued)