Jeep Cherokee 2000 Service Manual - page 1342
INSTALLATION
(1) Position the sleeve in the seat back.
(2) Firmly, push sleeve down to snap into place.
(3) Install head restraint.
HEAD RESTRAINT COVER
REMOVAL
(1) Remove head restraint from the bucket seat.
(2) Remove the screws attaching the bezel and
adjuster bar to the head restraint (Fig. 5).
(3) Pull the adjuster bar from the head restraint.
(4) Roll the cover upward and separate from the
head restraint cushion (Fig. 6).
INSTALLATION
(1) Position the cover on the head restraint cush-
ion and roll the cover downward.
(2) Position the adjuster bar in the head restraint.
(3) Install the screws attaching the bezel and
adjuster bar to the head restraint.
(4) Install head restraint in the bucket seat.
Fig. 2 Head Restraint Sleeve Extractor Installation
1 – SEAT BACK
2 – HEAD RESTRAINT SLEEVE
3 – EXTRACTOR TOOL 6773
Fig. 3 Head Restraint Sleeve Extractor Positioning
1 – EXTRACTOR TOOL 6773
2 – SEAT BACK
3 – LOCK RELEASE THUMBWHEEL
Fig. 4 Head Restraint Sleeve Extractor Positioning
1 – EXTRACTOR TOOL 6773
2 – SEAT BACK
3 – LOCK RELEASE THUMBWHEEL
Fig. 5 Head Restraint
1 – HEAD RESTRAINT
2 – BEZEL
3 – ADJUSTER BAR
23 - 14
BODY
XJ
REMOVAL AND INSTALLATION (Continued)