Jeep Cherokee 2000 Service Manual - page 924
(19) Install shift tower gasket onto shift tower.
(20) Install the shift tower oil deflector and gasket
onto the adapter or extension housing.
(21) Install shift tower onto transmission case
(Fig. 46).
(22) Install bolts to hold shift tower to transmis-
sion case. Tighten tower bolts to 18 N·m (13 ft. lbs.)
torque.
(23) Install new metal o-ring onto the backup lamp
switch.
(24) Install backup lamp switch (Fig. 47). Tighten
switch to 44 N·m (32.5 ft. lbs.) torque.
(25) Install new seal in adapter/extension housing.
(26) Install vehicle speed sensor, if necessary.
(27) Install clutch housing, release bearing, release
fork and retainer clip.
Fig. 44 Install Detent Spring
1 – PENCIL MAGNET
2 – DETENT BALL SPRING
Fig. 45 Install Detent Ball Plug
1 – TORX BIT
2 – DETENT BALL PLUG
Fig. 46 Install Shift Tower
1 – SHIFT TOWER
2 – ADAPTER/EXTENSION HOUSING
Fig. 47 Install Backup Lamp Switch
1 – SHIFT TOWER
2 – BACKUP LAMP SWITCH
21 - 16
AX5 MANUAL TRANSMISSION
XJ
DISASSEMBLY AND ASSEMBLY (Continued)