Jeep Cherokee 2000 Service Manual - Body
BODY
TABLE OF CONTENTS
page
page
DESCRIPTION AND OPERATION . . . . . . . . . . . . . . 1
SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . 3
PAINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
STATIONARY GLASS. . . . . . . . . . . . . . . . . . . . . . . . 6
SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
BODY COMPONENT SERVICE . . . . . . . . . . . . . . . 21
DESCRIPTION AND OPERATION
TABLE OF CONTENTS
page
DESCRIPTION AND OPERATION
BODY COMPONENTS . . . . . . . . . . . . . . . . . . . . . . 1
DESCRIPTION AND OPERATION
BODY COMPONENTS
PAINT
DESCRIPTION
The original equipment finish is a multi-step pro-
cess that involves cleaning, electrodeposition (e-coat),
base coat, and clear coat steps. Additionally, selected
areas of the vehicle may be coated with an anti-chip
finish.
OPERATION
On most vehicles a two-stage paint application
(base coat/clear coat) is used. Color that is applied to
primer is called base coat. The clear coat protects the
base coat from ultraviolet light and provides a dura-
ble high-gloss finish.
STATIONARY GLASS
DESCRIPTION
Windshields and selected stationary glass are
structural members of the vehicle. The windshield
glass is bonded to the windshield frame with ure-
thane adhesive.
OPERATION
Windshields are made of two pieces of glass with a
plastic inner layer. Windshields and other stationary
glass protect the occupants from the effects of the
elements. Windshields are also used to retain some
airbags in position during deployment. Urethane
bonded glass is difficult to salvage during removal.
The urethane bonding is difficult to cut or clean from
any surface. Before removing the glass, check the
availability of replacement components.
SEATS
DESCRIPTION
Seat modules are made up of a seat frame, seat
cushion, seat back cushion, a covering material, and
the electrical components used for power operation, if
equipped. Some seat systems also contain seat belt
components and supplemental restraint systems.
OPERATION
Seat assemblies transport the occupants in comfort
and safety. Seat assemblies also help position occu-
pants correctly in the event of airbag deployment.
Seat cushions, coverings, and electrical components
are serviceable. Refer to the appropriate group in
this manual.
EXTERIOR COMPONENTS
DESCRIPTION
Exterior sheet metal components make up the
exterior of the vehicle. Some exterior metal systems
are welded assemblies, such as doors and hoods.
Some exterior trim items are made of composite.
XJ
BODY
23 - 1