Jeep Cherokee 2000 Service Manual - page 923
Other manuals for Cherokee 2000:
Service Manual
of
1528
(15) Install shift restrictor pins in shift tower and
tighten to 27 N·m (20 ft. lbs.) (Fig. 42).
NOTE: The restrictor pins are not interchangeable
and are color coded. Be sure to install the pin into
the same location from which it was removed.
(16) Install shift detent ball in detent opening of
case (Fig. 43).
(17) Install detent spring in case (Fig. 44).
(18) Install detent plug and tighten to 19 N·m (14
ft. lbs.) (Fig. 45).
Fig. 40 Install Shift Arm Retainer Bolt
1 – RETAINER BOLT
2 – SHIFT ARM
Fig. 41 Shifter Arm Shaft Plug Installation
1 – SHAFT PLUG
Fig. 42 Install Shifter Restrictor Pins
1 – RESTRICTOR PINS
Fig. 43 Install Detent Ball
1 – PENCIL MAGNET
2 – SHIFT DETENT BALL
XJ
AX5 MANUAL TRANSMISSION
21 - 15
DISASSEMBLY AND ASSEMBLY (Continued)