Jeep Cherokee 2000 Service Manual - page 1193
(31) Check brake pack clearance with feeler gauge
(Fig. 151). Clearance should be 0.062 – 1.98 mm
(0.024 – 0.078 in.). If brake pack clearance is not cor-
rect, brake pack components are not seated. Reas-
semble brake pack if necessary.
(32) Install planetary sun gear and input drum
(Fig. 152). Be sure drum thrust washer tabs are
seated in drum. Use petroleum jelly to hold thrust
washer in position if necessary.
(33) Install front planetary gear on sun gear (Fig.
153).
(34) Support output shaft with wood blocks (Fig.
154).
Fig. 151 Checking Second Brake Pack Clearance
1 – BRAKE PACK
2 – FEELER GAUGE
Fig. 152 Installing Sun Gear And Input Drum
1 – SUN GEAR AND INPUT DRUM
Fig. 153 Installing Front Planetary Gear
1 – FRONT PLANETARY GEAR
Fig. 154 Supporting Output Shaft
1 – OUTPUT SHAFT
2 – WOOD BLOCKS
XJ
AW–4 AUTOMATIC TRANSMISSION
21 - 285
DISASSEMBLY AND ASSEMBLY (Continued)