Jeep Cherokee 2000 Service Manual - page 1192
(25) Position park lock rod bracket on case and
tighten bracket attaching bolts to 10 N·m (7 ft. lbs.)
torque (Fig. 147).
(26) Verify park lock operation. Move shift sector
to Park position. Park pawl should be firmly engaged
(locked) in planetary ring gear (Fig. 148).
(27) Install No. 1 one–way clutch (Fig. 149). Short
flanged side of clutch faces up and toward case front.
(28) Install second brake pack (Fig. 150). Install
disc then plate. Continue installation sequence until
five discs and five plates are installed.
(29) Install
second
brake
pack
retainer
with
rounded edge of retainer facing disc.
(30) Install second brake pack snap ring.
Fig. 147 Park Rod Bracket Installation
1 – PARK ROD BRACKET
Fig. 148 Checking Park Pawl Engagement
1 – REAR PLANETARY RING GEAR
2 – PARK PAWL
Fig. 149 Installing No. 1 One–Way Clutch
1 – NO. 1 ONE-WAY CLUTCH
Fig. 150 Second Brake Pack Installation
1 – SECOND BRAKE PACK
21 - 284
AW–4 AUTOMATIC TRANSMISSION
XJ
DISASSEMBLY AND ASSEMBLY (Continued)