Jeep Cherokee 2000 Service Manual - page 1208
Other manuals for Cherokee 2000:
Service Manual
of
1528
(5) Install new seal with Seal Installer 7549 (Fig.
202).
(6) Lubricate and install gears in pump body.
(7) Assemble stator shaft and pump body. Tighten
shaft–to–body bolts to 10 N·m (7 ft. lbs.) torque.
(8) Install new O–ring on pump body and new seal
rings on stator shaft.
(9) Install pump in torque converter and check
pump gear rotation (Fig. 203). Gears must rotate
smoothly when turned clockwise and counterclock-
wise.
(10) Lubricate pump O–ring and seal rings with
petroleum jelly.
Fig. 202 Installing Pump Seal
1 – SEAL INSTALLER TOOL
2 – PUMP SEAL
Fig. 203 Checking Pump Gear Rotation
1 – OIL PUMP
2 – TORQUE CONVERTER
21 - 300
AW–4 AUTOMATIC TRANSMISSION
XJ
DISASSEMBLY AND ASSEMBLY (Continued)