Riso RZ 970 Series User Manual - page 117
Advanced Features
Automatic Sorting Into Groups [Programme]
116
Setting Up for Programmed Printing
The steps below applies to both Single Page Mode Programme (single original) and Multi-Page Mode Programme
(multiple originals).
Both the Touch Screen and Print Quantity Keys (and related keys) may be used for this operation.
1
Press the
key.
Note:
• Press the
key and skip to step 3 of the
“Single Page Mode”. Press the
key and
skip to step 3 of the “Multi-Page Mode”.
• Alternatively, from the Master Making Basic
Screen, touch [Functions] then [Programme]
to display the Programme Type screen.
2
Touch [Single] or [Multiple].
3
Enter the numbers using the Print
Quantity Keys.
For Single Page Mode
1)
Enter the number of copies using the Print
Quantity Keys.
2)
Press the
key or the
key.
3)
Enter the number of sets (in the group)
using the Print Quantity Keys.
4)
Press the
key or the
key.
To programme more than one group, repeat
steps 1) - 4).
Note:
• To cancel or change a number, press the
key and enter again.
• To clear all (number of copies and number of
sets), touch [Clear All].
• The total number of all copies to be printed is
shown on the top of the screen.
Renew Page
Black
Image
Basic
READY
Idle
Info
A4
Admin.
Ready to Make Master
Programme Type
Single
Programme List
Multiple
Close
0 1 G
0 2 G
Renew Page
Black
Image
Basic
READY
Idle
Info
A4
Admin.
Ready to Make Master
Programme Type
Single
Programme List
Multiple
Close
0 1 G
0 2 G
10
2
1
30
20
2
40
5
50
3
60
70
Cancel
OK
Single Page Mode
P.1/9
Program-A
Total:1280
Cps.
Sets
Cps.
Sets
02G
01G
03G
04G
05G
06G
Entry/Call
Revise
Clear All