Riso RZ 970 Series User Manual - page 75
Functions for Master-Making
Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]
74
2 Up Operation
1
Place an original.
Important!:
• Pay attention to the orientation of the original.
For “2 Up”, make sure to place the original as
the diagram demonstrates.
The same is true when using the ADF unit.
Note:
• With the optional ADF unit you can print two dif-
ferent originals side by side on a single sheet of
paper (2 in 1 printing). Set the two originals one
above the other.
• To print two copies of the same original side by
side on a single sheet of paper (2 Up printing),
set the original on the Platen Glass.
2
Select paper size.
(For RZ977 only)
Touch [Feed Tray] to select [Standard-T], [Feed
Tray1], or [Feed Tray2].
Selecting one of the three trays will automatically
select the reproduction size suitable for the paper
size of the Feed Tray selected.
Important!:
• Make sure to load paper as shown below (Por-
trait direction).
Note:
• Case of RZ970;
If you set the original and print paper prior to
setting “Multi-Up Print”, the printer will automat-
ically set the size ratio.
3
Touch [Functions] on the Master
Making Basic Screen.
4
Touch [2 Up].
5
Make necessary settings.
Make various settings as needed.
After this, please follow the same operations for
normally making a master.
6
Press the
key.
Starts scanning of the original.
Paper output
direction
READY
A4
Black
Page(A4)
Basic
Selections
Functions
Admin.
Contrast
Size
Feed Tray
Idle
Info
Ready to Make Master
D-Feed
Check
Multi-Up
Line
Auto
Basic
Selections
Functions
Admin.
P.
Programme
Digital Copy Count
1/4
Job Memory
Job Memory
Dot Process
Multi-Up Print
Contrast Adj
Tone Curve
Ready to Make Master Multi-Up
2 Up