Riso RZ 970 Series User Manual - (Scan Mode)
Storage and Scan Modes (Option)
Converting Hard-copy to Stored Data (Scan Mode)
171
Converting Hard-copy to Stored Data
(Scan Mode)
Scanning an Original
1
Select a scan mode.
See )p.26 for information about selecting a scan
mode.
2
Place the original.
See step 3 of “Printing from a Paper Document or
Book” ()p.41).
Go to step 4 if you are not specifying folder, data,
or owner name. If no settings are configured, data
is stored by default (FIle Name: scan_001, Direc-
tory:1_folder, Owner:Owner-1).
3
Setting data information.
Sets the data name, save location and owner
name.
4
Setting required functions.
Set the required functions for scanning the origi-
nal.
Note:
• You can check scanned data instantly by ena-
bling the “Preview” function. You can also use
this function to check data before saving.
• See the previous section for the functions that
can be set.
Important!:
• Set “Format” when scanning custom-sized orig-
inals.
5
Press the
key.
The scan starts.
Note:
• After scanning the original, a preview shows on
the display if “Preview” is set.
6
Repeat steps 2, 4 and 5 if the original
has multiple pages.
Note:
• If multiple originals are combined on the ADF unit
(option) and “Auto Process” is set to ON, all orig-
inals will be scanned using the same settings.
Check the
key indicator to determine
if “Auto Process” is ON or OFF (illuminated indi-
cates ON).
If “Auto Process” is OFF, press the
key
for each original.
A3
Auto
Ready to Scan Data
Page (A3)
Contrast
Size
Format
Functions
Basic
Admin.
Page No.1
File Name
Owner
Owner-1
scan_0001
1_folder
Directory
Auto
Line
Preview
Book
Shadow